IDX Feed Errors: Why Listings Break and How to Fix Them

Agent checking a property listing website
October 21, 2026

IDX Feed Errors: Why Listings Break and How to Fix Them

Most IDX feed errors fall into five buckets: a refresh delay you can’t control, a display permission that’s switched off, a mismatch between how your MLS formats data and how your site reads it, a stale cache on your own website, or a broken license connection. Work through them in that order and you will usually find the culprit in under an hour. The sections below show you how.

I have watched agents blame their web developer for a “broken feed” when the listing simply hadn’t left the MLS yet. I’ve also watched agents shrug at a sold home still showing as active for two days. Both mistakes cost credibility. Let’s get you out of both.

Plo
Keep Listing Data Working for You
Plo helps real estate agents streamline prospecting and sales with tools that amplify their everyday work.

Explore Plo

TL;DR

  • Overview: an “error” is often a timing gap, not a failure. MLSs refresh on their own schedules, and your site adds its own caching on top.
  • Check in this order: is the listing IDX-enabled, when did the MLS last update, what does your site’s cache say, and is your data license active.
  • Stale status codes are a compliance risk, not just an annoyance, so monitor your feed weekly rather than trusting it blindly.
  • Format quirks between MLSs (subdivision names, timestamps, field order) cause real display bugs that need a technical fix, not a refresh.
  • A 15-minute weekly routine catches most problems before a buyer does.

Table of Contents

What an IDX feed error actually is

An IDX feed moves listing data from your MLS to your website. Between those two points sit the MLS database, a data provider or technology vendor, your website software and your visitor’s browser. An error can happen at any hop, which is why “the feed is broken” is rarely a useful diagnosis.

If you need the bigger picture on how IDX differs from the MLS itself and what that means for your search visibility, we wrote a short guide with four IDX and MLS questions that protect your SEO. Here, we’re focused on the symptoms.

The most common ones:

  • Listings that are sold, pending or withdrawn but still show as active.
  • New listings that don’t appear for hours or a full day.
  • Photos missing, out of order or showing a placeholder.
  • Whole categories of listings missing (a specific area, property type or office).
  • Odd text: strange subdivision names, wrong dates, garbled characters.
  • A blank search page or a connection or authentication message.

Each has a different cause. Let’s take them one at a time.

Error 1: Listings that are slow to appear or slow to disappear

This is the number one complaint, and it is frequently not an error at all.

MLS data doesn’t move instantly. Feeds refresh on a schedule the MLS controls, and some MLSs update in about 15 minutes while others update once or twice a day. That lag is built into the system. On top of it, your own website may cache results, so a record changed in the MLS hours ago can still look old on your pages.

How to check

  1. Find the exact time the listing was added or changed in your MLS.
  2. Ask your data provider or vendor how often your MLS feed is pulled. Most publish this somewhere in their coverage information.
  3. Clear your site’s cache, or reload in a private browser window, and look again.
  4. If the listing is still wrong after the MLS’s stated refresh window plus your cache window, escalate.

A real example of the trap: you update a listing to pending at 9 a.m., a buyer’s agent calls at noon about the “active” listing on your site, and you’re tempted to apologize for a bug. Don’t. Explain that your site follows the MLS refresh cycle, then check the cache. Setting that expectation early with clients is part of looking professional, and industry guidance makes the same point: IDX isn’t real time.

When the delay becomes a liability

A delay is fine. A neglected feed is not. Treating IDX as a “set it and forget it” pipe instead of a distribution layer you monitor is how brokers end up displaying outdated status codes, and that has led to compliance fines. Your MLS rules set the standard, so read them, and spot-check a handful of listings each week.

Error 2: A listing exists in the MLS but never shows on your site

Before you suspect the feed, suspect the listing. Sellers and listing agents can opt a property out of IDX display. If the listing isn’t flagged as allowed to display, no feed will show it, and that is by design.

Status rules matter too. Take Coming Soon listings: one regional MLS, CVR MLS, says that beginning May 20, 2026, Coming Soon listings are distributed to public-facing sites, including IDX. If your MLS changed a rule like this and your site’s behavior changed with it, that’s policy, not a bug. Your MLS will have its own version, so check yours.

Quick triage for missing listings

Symptom Likely cause First move
One listing missing IDX display not allowed, or status excluded Check the display flag and status in the MLS
Recent listings missing Refresh window not yet passed Compare MLS timestamp to feed schedule
One area or property type missing Feed filter or search settings too narrow Review your site’s feed settings and saved searches
Everything missing License or credential problem Confirm your data agreement is active

The fourth row deserves its own section.

Error 3: The whole feed goes dark

If nothing loads, think about authorization before code. Your site can only pull MLS data if an agreement exists between you (or your broker), the MLS and your technology provider.

MLSs set the process. At CVR MLS, for example, if your technology provider is already on its data platform, you ask them to start a data license agreement with you; otherwise the provider has to register first. Your MLS will have its own steps, but the logic is the same: the license is tied to your broker, your vendor and your MLS, and if any link lapses, the feed can stop.

Common triggers:

  • You changed brokerages and the old broker’s agreement still sits on your site.
  • You switched website vendors but never started a new license.
  • Your MLS moved from one data format to another, and the old connection was retired.
  • A billing or credential problem with your vendor.

If you are applying for a new feed, know your rights. NAR policy requires MLSs to act on new feed requests within five business days, provided the applicant meets qualification and compliance standards. If you are three weeks in with no response, you have grounds to follow up firmly. Keep your emails and dates.

Error 4: Garbled, inconsistent or oddly formatted data

This is the category that frustrates agents most, because the feed is technically working. It’s just saying strange things.

Every MLS is its own system, and even with shared standards the details differ. The RESO Data Dictionary standardizes field names, yet differences in formats, such as how subdivisions are named or how time zones and timestamps are read, still create processing problems. The same RESO article describes how disjointed traditional MLS data systems are, with little consistency outside a few shared pieces.

What that looks like on your site:

What you can do

You can’t rewrite how your MLS stores data, but you can:

  1. Document the exact examples (listing numbers, screenshots, times).
  2. Send them to your vendor with the MLS’s name and the feed type you use.
  3. Ask whether the issue is mapping on their side or source data from the MLS.
  4. If it’s source data, report it to the MLS’s support team with the same evidence.

Vague tickets stall. Specific ones get fixed.

Error 5: Photos, sold data and add-on content

Photos have their own failure modes. A photo problem can mean the MLS hasn’t sent the images yet, the images were manually overridden on your site, or the image host is slow. Some IDX dashboards let you manually upload images, and manual uploads can sit on top of MLS photos until you revert them. If your platform has that option, check it before filing a ticket.

Sold data is the other surprise. Whether you can show sold listings, and how far back, depends on your MLS’s rules and the feed your vendor receives. Industry explainers on compliance note that IDX covers active listings, sold listings where the MLS permits, and limited historical information, and that using IDX data for things like analytics or valuation products carries compliance risk. If your sold pages look thin, your permissions may be the reason.

Compensation display is another area where rules changed. CVR MLS’s guidance on the NAR settlement says brokers may display compensation offers on their own listings on their own websites, while IDX-sourced listings from other offices follow different rules. Read your local MLS’s policy before you change any display on your pages.

Error 5: Photos, sold data and add-on content — overview diagram

A diagnostic order that saves hours

When something looks wrong, don’t poke at random. Use this sequence:

  1. Confirm the source. Open the listing in your MLS. Is the data right there? Is it flagged for IDX display?
  2. Check the clock. When was it changed? What’s the MLS refresh window for your feed?
  3. Rule out your cache. Hard reload, private window, then purge the site’s cache.
  4. Test a second listing. If only one is wrong, it’s probably the listing. If many are wrong, it’s the feed or settings.
  5. Verify your license. Is your data agreement active under the current broker and vendor?
  6. Gather evidence and escalate. Listing numbers, timestamps, screenshots, what you’ve already tried.

If the problem is a pattern across several listings, our five-step checklist for fixing listing syndication walks through the MLS and RESO side in more depth.

Why IDX errors cost more than you think

A stale listing is a small embarrassment. A site that breaks quietly for weeks is a lead leak.

Think about the buyer who finds a home on your site, calls, and learns it sold Tuesday. That buyer doesn’t blame the MLS. They remember your brand as the site with old data. Multiply by every visitor who bounces silently, and a feed problem becomes a pipeline problem.

There is a search side too. An IDX feed shouldn’t be your only content. One recent industry piece makes the point that an IDX feed should not replace original, indexable content, and our IDX SEO triage with five technical checks shows what to review so your pages aren’t weighed down by duplicated listing data.

Perspective: treat your feed like a storefront window

We work with agents, yacht brokers and luxury sales teams, and one pattern repeats. The professionals who win aren’t the ones with the fanciest site. They’re the ones whose site is always telling the truth.

In luxury and high-value sales, a single wrong detail travels fast. A listing that’s shown as available after it has gone under contract tells a high-net-worth buyer that nobody is minding the store. That’s why we push our clients toward a simple rule: your website is your storefront window, and you wipe it down every week.

We don’t believe in heroic fixes. We believe in small, boring habits. Check your top ten listings against the MLS. Test your search on a phone. Confirm your lead forms still deliver. Write down your MLS’s refresh schedule and tell your clients about it up front, so a delay becomes a non-event instead of a trust problem.

What we can offer is the system around the feed: website management, listing management, and the follow-up automation that makes sure the leads your listings attract don’t fall through a crack. We can’t change how your MLS publishes data, and we won’t pretend otherwise. What we can do is help you catch problems early and respond like the pro you are.

— Jason

Build a 15-minute weekly routine

Consistency beats intensity. Put this on your calendar every week:

  • Minutes 1 to 5: Pick five active listings and compare price, status and photo count with the MLS.
  • Minutes 6 to 8: Search your site by your top two neighborhoods. Do results look complete? Do names look consistent?
  • Minutes 9 to 11: Submit your own lead form and confirm the notification arrives and lands in your CRM.
  • Minutes 12 to 13: Load the site on your phone over cellular data. Is it fast?
  • Minutes 14 to 15: Log anything odd with the date and listing number.

Our 15-minute weekly website maintenance guide expands on this routine, and a log of odd findings is gold when you open a ticket. Vendors respond to patterns.

Where we can help

If feed monitoring, listing updates and lead follow-up are eating your week, that is the work we take off your plate. Our plans, as published on our pricing page:

  • 🚀 Marketing suite: $445 per month
  • 🎯 Leads Guaranteed: $5,899 per month
  • 🤝 Performance Partner: from $6,000 per month

Expert add-ons include a lead-gen expert and a marketing manager at $1,000 per month each. Not sure which fits? Start with the pricing breakdown and see what matches your volume and goals. If you’d rather talk through your setup first, start at ex.plo.re/crm.

FAQ

How long should an IDX listing take to appear on my website?

It depends on your MLS and vendor. Some refresh in about 15 minutes, while others update once or twice a day, and your own site’s caching can add more delay. Ask your vendor for the refresh schedule on your specific feed and plan around that.

Why does my site still show a sold listing as active?

Usually the MLS refresh window or your site cache hasn’t caught up yet. Check the listing status in the MLS, clear your cache and wait out the stated refresh window. If it persists beyond that, send your vendor the listing number and timestamps, because stale statuses can create compliance trouble.

How do I get an IDX feed for my website?

You need an active IDX agreement through your broker and a technology provider that your MLS supports. The exact steps vary by MLS, and some, like CVR MLS, start the license through the provider’s data platform. Under NAR policy, MLSs must respond to new feed requests within five business days if you qualify.

Can I fix field and formatting errors myself?

Usually not. Odd subdivision names or timestamp problems come from how MLS data is structured or mapped, so the fix sits with your vendor or the MLS. What you can do is document specific examples so they can act quickly.

Is it a problem if my site only relies on IDX content?

It can hurt you. Listings are shared across many agent sites, so they don’t set you apart. Add original pages, such as neighborhood guides and market commentary, and keep the feed as one part of the site.

Sources