Engines and Propulation
- Twin Cummins QSB6.7 425 IDI diesels
- Rated output: 419 hp each at 3,000 rpm
- Twin ZF Marine ZF286A reduction gears
- 2.208:1 gear ratio
- Electronic ZF engine and transmission controls
- Four-blade bronze propellers
- 1¾-inch stainless-steel shafts
- Tides Marine SureSeal shaft seals
- SeaStar hydraulic steering
- Side-Power 24-volt bow thruster
- Lenco trim tabs
Survey-Observed Performance - Approximately 15.5 knots at 2,000 rpm
- Approximately 21.5 knots at 2,400 rpm
- Approximately 28 knots at 3,000 rpm
Helm and NavigationThe enclosed pilothouse provides excellent visibility and direct access to the working decks.
- Twin Garmin multifunction displays
- Garmin GPS and chartplotting
- Garmin radar
- Garmin depth sounder
- Garmin hydraulic autopilot
- Two Garmin fixed-mount VHF radios
- Ritchie magnetic compass
- Golight remote searchlight
- Fusion marine stereo
- Electronic Cummins engine instrumentation
- Dedicated navigation and work surfaces
Deck and Working Equipment - Large aft working deck
- Full walk-around side decks
- Heavy-duty welded-aluminum perimeter railings
- Foredeck working area
- 24-volt electric drum-style anchor winch
- Galvanized Vulcan-style anchor
- Galvanized anchor chain
- Shurflo raw-water deck-washdown pump
- Three 24-volt electric bilge pumps
- Reversible fuel-transfer pump
- Transom dive/swim platform
- Platform-mounted reboarding ladder
- Navigation, anchor and work lighting
Interior Comfort and Accommodations - Forward berth with 3 bunks
- Enclosed head compartment
- Electric freshwater macerator-flush toilet
- USCG Type III holding-tank system
- Webasto diesel forced-air heater
- Three Heater Craft engine-supplied hydronic heaters
- Interior storage and work surfaces
Electrical System - 24-volt primary DC system
- 12-volt equipment circuits
- 120-volt AC system
- Ten Lifeline AGM batteries reported in the 2025 survey
- Separate port and starboard engine-start banks
- Two house-battery banks
- Victron Energy MultiPlus inverter/charger
- 70-amp, 24-volt charging output
- 3,000-watt, 120-volt inverter output
- Victron Orion 24-to-12-volt converter
- Charles ISO 3.6 kVA isolation transformer
- SmartPlug 30-amp, 125-volt shore-power inlet and cable
Survey and Maintenance InfoAvailable documentation includes:
- May 2025 condition and valuation survey
- Historical engine-service information
- Cummins maintenance information
- Yard invoices
The May 2025 survey identified maintenance items involving the port-engine seawater pump, hydraulic steering system, autopilot rudder-angle sender, rudders and propellers. The bow-thruster anode was subsequently replaced by CSR Marine.
Status DetailsSentry was partially disassembled to ship overseas. Plans changed, and so Sentry is presently stored ashore at a secure yard in Ballard/Seattle.
The following equipment was removed, packed and represented as stowed aboard:
- Mast and mast-mounted electronics
- Propellers
- Trim tabs and trim-tab rams
- Transom-mounted transducer
- Transom dive/swim platform
- Aft seat and associated transom structure
Minor reinstallation, recommissioning and testing will be required before normal operation.
DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.