2018 Riva Reets Aquarama 30'

Price

$285,000

~ $2,126.mo

Explore Financing

Overall Length

30 ft

Location

Mayfield New York United States

Category

Power

Year

2018

Model

Reets Aquarama

Fuel Tank Capacity

264 Gallons

Beam

9' 2"

LOA

30'

Cabin Count

0

Engine

2018 Ilmor Marine Gas/Petrol 6.2 Inboard 430Hp 321Kw

Hull Material

Fiberglass

Description

Hardware:

Taylor Made SS Windshield
Lift rings, lift hardware, lift brackets
Deck vents, rope chocks, motor cover hinge, rub rail, cutwater, bow light, stern light
Drain plugs, shift linkage, steering wheel, steering linkages, Hydraulic Steering
2 Rudders, rudder stuffing box, driveshaft, shaft log, drive flange, Bronze prop
Battery cables, dual batteries, all wiring, start switch lights
Black ribbed Vinyl flooring, Fire extinguisher
Bow and stern thrusters
Wood Swim platform

Electronics:

Simrad 9 with an audio unit
Humminbird depth Gauge

Powertrain:

The engines are Ilmor 6.2L 430hp.
Direct drive stainless steel shafts.
Freshwater cooling for saltwater.
Twin aluminum 75 gallon tanks
The gauges are replica gauges produced by classic instruments in their vintage Riva style.

United Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Denison Yachting. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

This boat was designed and built by Reets Boatworks in Mayfield, NY. Although it may look similar to the Italian boat it is significantly different.

She is powered by twin Ilmor 6.2 V8’s along with a bow and stern thruster to make dockside maneuvering easy. The integrated swim platform makes for a nice all-around addition to the boat.

The boat is cold molded and 3 layers thick with west system epoxy between each layer. From the waterline down, it has carbon fiber in between each layer and a layer of Kevlar with fiberglass to protect the outside. That is then coated with Pettit Protect impervious bottom paint.

This boat has been used sparingly by the owner and has not been used in 2 summers.

The boat's design is a replica of the original boat frames and lines while using modern materials to improve strength, lower maintenance costs, and improve performance.

The bottom is 3 layers of ¼” Okoume plywood epoxy coated on all sides, bi-axial carbon fiber in-between the 1st, 2nd and 3rd layers. The bottom is wrapped with 6oz fiberglass and then faired using West system 410 microfibers.

The sides and the deck are composed of 3 layers. Two inner ¼” plywood skins will be coated on all surfaces and then planked with 3/8” Mahogany. The sides and deck were then stained traditional colors and varnished with 12-14 coats of Pettit flagship varnish.

All the screws and bolts used in the boat are stainless steel. All the epoxy used is the West System.

The bilge area is Coated with West system epoxy and then varnished with two coats.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. Hours listed may vary from actual hours due to recent use. Purchaser is encouraged to verify hours prior to purchase. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Listing MLS by Yachtr.com

Share

Post

Gallery