HULL
Cabo uses high-tech laminating processes to ensure tremendous hull and topside strength with highly sophisticated reinforced fiberglass interior modules adding greater resistance to torsion and flexure.
- Hull – Navy Blue
- Boot striping – White
- Bottom paint, complete preparation 2 coats epoxy, 2 coats anti-fouling paint; black
- Stainless steel rub strip on face of white high-density PVC rub rail
- Trim tabs, interceptor style, recessed
COCKPIT
The massive cockpit is a fisherman's dream. There are two large-capacity, insulated fish boxes equipped with macerators and a bait prep center including a sink, rigging board and plenty of tackle and rod storage. An optional 48-gallon bait tank is molded into the transom.
- Bait prep center – sink, rigging board and tackle storage fitted with custom lid, gas spring, full-length stainless steel piano hinge and custom latch
- Bait tank, 48-gallons, molded into transom
- Gunwale padding, high-density foam, white vinyl
- Courtesy lighting under gunwales and helm deck toe kick
- Fish boxes (2), large capacity, insulated, macerator pump-out system
- Hatches, lazarette and fish boxes, heavy-duty, gasketed, drains, gutters and full-length stainless steel piano hinge and custom latch
- Hose and pistol-grip nozzle
- Icebox, fitted with custom gasketed lid, gas spring, full-length stainless steel piano hinge and custom latch.
- Rod holders (9)
- Scuppers, self-bailing
- Transom door with top gate, extreme-duty, polished stainless-steel hardware
- Washdowns, fresh-and saltwater
- Shore-power pole
DECK
Quality and precision throughout, for example, the flat head screw straight-slotted bolts offset for optimum holding and oriented to the same exact angle. Cabo uses 316 stainless steel hardware that provides higher nickel content resulting in superior corrosion resistance and longer lasting strength, reliability and good looks.
- Anchor roller assembly, recessed, custom stainless steel
- Bow cleats, 12" stainless steel
- Spring line cleats, 10" stainless steel
- Stern cleats, 12" stainless steel
- Bow pulpit, integral molded fiberglass
- Custom deck rails, aluminum
- Deck surface, molded-in, non-skid
- Molded fiberglass using polyester resin, biaxial stitched fabric reinforcement and core construction
- Molded-in white gelcoat finish
- Stern hawse pipes, stainless steel
- Lewmar windlass, heavy-duty, DC electric, remote at helm
- Galvanized anchor with 25' chain and 250' nylon rode
- Windshield wipers (3), self-parking with pantograph arms, intermittent and separate controls
- Windshield, side vents, heavy-duty welded aluminum construction, finished in white powder coat; includes electrically actuated center vent
- Windshield washers (3), wet arms
HELM DECK
The helm deck provides good visibility in all directions and comfortable seating while at the dock or underway. This boat is air conditioned and provides bench seating for the helmsman and their companion. To starboard the seat conveniently raises for viewing the baits while fishing. An optional ice maker and storage compartment are conveniently located aft of the helm station.
- Molded fiberglass helm deck, hydraulically lifted with cockpit control unit
- Full white canvas enclosure
- Stidd helm companion seat with white upholstery, canvas cover, and foot bolster
- Stidd helm passenger seat with white upholstery, canvas cover, and foot bolster
- Companionway door, sliding, opaque with white acrylic
- Engine access hatch
- Helm console, integrally molded
- Tackle center with drawers for gear storage and organization
- Helm deck air conditioning
ELECTRONICS/HELM CONSOLE
The raised helm console provides outstanding visibility and is well equipped with an array of Navigational electronics.
- Man electronic ignition controls
- Furuno dual multi-function displays Nav Net TZ2 Touch Screens (Chartplotter, Radar, Sounder)
- Furuno 15” Screens (2019)
- FLIR
- Furuno RD-30
- Simrad AP-28 Auto-Pilot
- Icom VHF with speaker
- ACR Remote Searchlight
- Bennet Trim Tabs
- Fusion Stereo
- Fuel Gauge
- Ritchie Compass with backlight and flush mounted
- Console canvas cover
- Rexroth Electric twin lever controller
- Engine instrument panel, custom with audible warning system and hour meters
- Fire and bilge water level audible alarms
- Stainless steel helm wheel
- Navigation and electronic panel
- Switch panels, custom stainless steel
MAIN CABIN
Below deck the salon and galley provide hand-selected teak wood with its ultra high-density grain and natural oils, which is milled in-house, varnished and then buffed to a satin finish. The optional teak and holly floor provide for a luxurious finished detail. The L-shaped lounge converts to an upper/lower berth arrangement, for additional sleeping accommodations.
- AC duplex outlet/GFI protected
- Access hatch to bilge
- Air conditioning/heating, 10,000 BTU
- Inlaid table settee with Cabo custom cover
- Interior wood, teak, satin finish
- Latches, positive, cabinet doors and drawers
- L-shape lounge, converts to upper and lower sleeping berths
- Lighting, recessed halogen
- TV, flat screen
- Stereo with AM/FM, CD, DVD, speakers in salon and forward, DC
GALLEY
The galley features an abundance of storage with undercounter refrigeration, two burner cooktops hidden beneath Corian countertops with molded in sink. Adjacent to the galley is an L-shaped settee with dinette table and wall recessed TV. This L-shaped lounge converts easily to upper and lower sleeping berths.
- AC duplex outlet/GFI protected
- Ceramic two-burner cooktop, recessed with Corian® cover
- Corian® countertop with custom Corian® sea rails
- Cabinet doors and drawers
- Sylvania SS Microwave/convection oven
- Refrigerator/freezer, side-by-side, AC/DC
- Custom sink/faucet
- Storage, compartments and drawers throughout
- Undercabinet lighting recessed halogen
- CO2 Detector
STATEROOM
The forward stateroom features a Queen pedestal V-berth to accommodate two adults, with abundant overhead storage lockers, two hanging lockers and drawer and shelf storage below the bed.
- AC duplex outlet/GFI protected
- Air conditioning/heating, 7,000 BTU
- Access to anchor rope/chain locker
- Queen pedestal berth
- Foredeck hatch with retractable shade
- Cabinet doors and drawers
- Recessed halogen lighting
- (2) Cedar lined and auto lit hanging lockers
- Drawer and cabinet storage below bed
- (2) Horizontal rod storage racks inside cabinets
HEAD
A private head provides easy clean up with a stall shower, solid surface countertops and under mount sink.
- AC duplex outlet/GFI protected
- Corian® countertop
- Mirrored cabinet
- Head, Sealand Vacuflush, electric
- Cabinet doors and drawers
- Recessed halogen lighting
- Vanity sink/faucet
- Separate enclosed shower with handheld spray faucet
ELECTRICAL
Cabo's electrical system is individually built by master electricians and is easy to navigate as it is clearly labeled and backlit. All wires are neatly bundled and follow perfect parallel lines. The electrical panel hinges for ease of accessibility.
- 12.6-KW Westerbeke freshwater-cooled diesel generator with seawater strainer, remote start and digital panel, water lift muffler, safety shutdown system, and sound enclosure
- Battery charger, 50 amp
- Battery on/off switches, vapor-proof
- Bonding system
- Cable TV connection, cockpit
- Distribution panel, custom, AC electrical, with line voltage and load meter, reverse polarity light
- Distribution panel, custom, DC electrical, with battery voltage and load meter
- Electronic supply at helm, 12-V DC at 50 amps
- Horn, dual air trumpet on tower
- Lights, engine room, DC
- Lights, interior, DC
- Lights, navigation on tower
- Receptacles throughout cabin, GFI protected
ENGINES/MECHANICAL
Engines/Mechanical:
The entire helm deck electrically and hydraulically raises activated by a switch from the cockpit making the engine room easy to access and maintain. The bilges are finished in bright white gelcoat with ample space for installation of additional equipment. The systems are meticulously organized, grouping major components, for ease of accessibility and maintenance. Fuel lines are fire-retardant, aircraft-grade braided stainless steel and all wiring is tin copper to resist corrosion.
- Man Diesel engines
- Bilge, white gelcoat finished
- Bilge pumps (4), three automatic/manual, one automatic
- Double constant torque stainless steel clamps on engine exhaust hoses
- Double hose clamps on all hose fittings, stainless steel
- Electronic controls, engine synchronizer and back up
- Emergency bilge pump diverter valve on one engine
- Engine alarm system
- Engine room, white gelcoat finished
- Engine room blowers (2), DC
- Fire extinguishing system, automatic
- Freshwater cooling, main engines
- Fuel lines, metal braided, fire-retardant
- High water bilge alarms (3)
- Holding tank, with warning lights, macerator and dockside discharge
- Propeller shafts, double taper, couplers, high-strength stainless steel
- Power-assisted steering
- Rudders, bronze, high-strength, with high load bearings (low friction, precise control)
- Sea cocks, UL approved for marine application, bronze, fitted on all thru-hulls below waterline
- Stuffing boxes, drip-less lip seal type
- Water heater, 11-gallon, AC, stainless steel
- Water intake scoops, bronze, high-speed, with integral seawater strainers
- Reverso Oil Change System - Engines, Gear, Generator
TOWER
This boat is equipped with a custom Bausch American Full Tower, radar pod, Rupp double spreaders and center rigger.
- Standing platform and Buggy Top
- Radar random pod on hardtop
- Rupp Double Spreaders & Center Rigger
- Furuno multi display
- Furuno RD-30
- Simrad AP-28 Auto-Pilot
- Helm, bench seat/bolster, and back rest cushions with canvas covers
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
